Promate 240+ - Inverter Specifications; General Specifications; Control Panel Features

II. SPECIFICATIONS
GENERAL SPECIFICATIONS:
Dimension(cm): 27.3 x 26 x 29.8
Gross Weight: 12 kgs
Output:
12V DC Socket (max. 11 Amp)
12V DC Jack x 2 (total max. 1 Amp)
5V 2.1A USB Port x 3 (Low voltage shut down 10V ± 0.3V)
QC 3 A USB Port x 1 (Low voltage shut down 10V ± 0.3V)
Type C Port x 1 (Low voltage shut down 10V ± 0.3V)
220V AC Power Inverter 400Watt (Low voltage shutdown 10V ± 0.3V)
External battery connection for jumpstarting
Work light:
5 X LEDs Work-light (Low voltage shut down 10V ± 0.3V)
Charging:
Car – AC/DC Charging Port
AC – AC/DC Charging Port
Solar Charging Port
Type C DC Charging Port
Built-in Battery: 2 x 12Ah-12V Valve Regulated Lead Acid – AGM Type Battery
INVERTER SPECIFICATIONS:
Output Power Continuous: 400W Operating
Voltage: DC 11-14.5V
AC Output Voltage (RMS Meter): 220V ±10%
Output Wave Form: Filtered Modified Sine Wave Low
Battery Alarm: DC 10.3V ± 0.3V
Low Battery Shut Down: DC 10 ± 0.3V
Frequency: 60 Hz ± 3
Efficiency: 85%
No Load Current Draw: < 0.65A
Over Temperature Protection: 100°C ±10%
CONTROL PANEL FEATURES
1. Rubberized Handle
2. Digital Display
3. AC/DC Charging Port
4. 2 x 12 DC Jack
5. Solar Charging Port
6. 12V DC Socket
7. QC 3 USB Port
8. USB Port
2
3