b. Connect the Car Charger to the AC/DC Charging Port.
c. Connect the Type C DC charger to the Type C Port.
d. Connect the Solar Panel to the Solar Port.
While the product is charging, the battery level display will flash. The unit is fully charged when the battery level
reaches 100% and remains steady without fluctuating.
CAUTION
This unit has a maintenance free, built-in sealed lead acid battery. Although the Powerstation arrives partially
charged from the factory, it must be fully charged for 24 hours before first use, even if the digital meter indicates
“100%”, the battery is full. This initial charge pre-conditions of the battery are necessary. Failure to follow this
procedure may permanently damage the battery.
CHARGING WITH AC ADAPTOR
1. Keep the AC and DC/USB power switches in OFF position while charging.
2. Completely charge your Powerstation before using it for the first time.
3. Quick press the Power On/Off switch to activate the battery display.
4. Before recharging from an AC Outlet, be sure that the source is right. (i.e.,110 volts or 230 volts)
5. Use only the chargers provided with the unit.
6. Plug the AC Charging Cord into any standard wall outlet and the other end into the AC/DC Charging Input Socket.
7. While the product is charging, the battery level display will flash. The unit is fully charged when the battery level
reaches 100% and remains steady without fluctuating.
CHARGING WITH Type C ADAPTOR
1. Keep the AC and DC/USB power switches in OFF position while charging.
2. Quick press on the Power On/Off Switch to activate the battery display.
3. Connect your gadget's Type C charger to the unit's Type C In/Out Port.
4. While the product is charging, the battery level display will flash. The unit is fully charged when the battery
level reaches 100% and remains steady without fluctuating.
CHARGING WITH CAR DC ADAPTOR
Due to safety circuits built into the input-charging jack, DC charging through this port will not fully charge the battery.
1. Keep the AC and DC/USB power switches in OFF position while charging.
2. Quick press the Power On/Off Switch to activate the battery display.
3. Insert the DC Adapter Plug into the charging port of the unit and the other end into the cigarette lighter socket of
your vehicle.
4. The battery level will begin fluctuating, indicating that the unit is charging. Ensure your vehicle is running during
charging to prevent draining the car's battery.
To Next Page
Loading...
