Promax RG5410A-E - Set-up Diagram for “Push;Pull” Method

Advanced Test Products Europe RG5410A-E
- 8 -
SET-UP DIAGRAM FOR REFRIGERANT RECOVERY
This method is the fastest method for recovering vapor refrigerant.
MANIFOLD GAUGE SET
(OPTIONAL) MOISTURE
SIGHT GLASS
INPUT
OUTPUT
LIQUID
A scale must be used
to avoid overfilling the
storage tank.
SYSTEM
BEING
SERVICED
VAPOR
LIQUID
SET-UP DIAGRAM FOR “PUSH/PULL” METHOD
Push pull only works with large systems where the liquid is readily accessible. Do not
use this method on systems that contain less than 15 pounds as it may not work.
SYSTEM
BEING
SERVICED
LIQUID
VAPOR
VAPOR
LIQUID
OUTPUT
OPTIONAL MOISTURE
INDICATING SIGHT GLASS
INPUT
The sight glass is used to provide a method of
determining the moisture content and quality of a
system’s refrigerant.
A scale must be
used to avoid
overfilling the
storage tank.
EINLASS
DAMPF