Why is the output of my ProMed EMT-6 intermittent?
An intermittent output from your ProMed Medical Equipment can be caused by a few things. First, verify the lead wire connection is secure. Turn down the intensity and rotate lead wires in socket 90°. If the issue persists after replacing the lead wire, a component may have failed. Also, some programs will seem intermittent, this is expected.
How to troubleshoot ProMed EMT-6 when the display doesn't light up?
If the display on your ProMed Medical Equipment fails to light up, try these troubleshooting steps. First, try fresh batteries. Second, ensure batteries are inserted correctly and check the following contacts: All contacts are in place and not broken. This issue is often caused by battery contact failure.
General| Type | Emergency Transport Ventilator |
|---|---|
| PEEP Range | 0 - 20 cmH2O |
| Oxygen Concentration | 21 - 100% |
| Battery Life | Up to 6 hours |
| Modes | A/C, SIMV, CPAP |
| Power Source | AC Power, Internal Battery |
| Weight | 4.5 kg |
Overview of the device components and their functions.
Explanation of the symbols and information displayed on the device screen.
Lists conditions where the device should not be used or used with caution.
Key safety warnings for device operation and user care.
Details on user precautions and potential adverse effects.
Guidance on applying electrode pads to the skin correctly.
Steps for connecting device components for operation.
To Next Page
