4. Cleaning and Maintenance
1. Always unplug the instrument before cleaning.
2. Clean the outside of the instrument by wiping with a damp cloth. Remove
spills or stains with a cloth dampened with a mild detergent.
3. If liquid is spilled inside the tube holder, invert the Quantus™ Fluorometer to
drain the excess liquid. Wipe the inside area dry with a clean soft cloth. If
additional cleaning is needed, wipe with a cloth dampened with a mild
detergent, remove detergent with a cloth dampened with water and wipe dry.
4. Do not use organic solvents; they may damage the plastic case of the
Quantus™ Fluorometer.
5. Do not submerge the Quantus™ Fluorometer in water.
6. Do not disassemble the unit.
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA
Toll Free in USA 800-356-9526 · Phone 608-274-4330 · Fax 608-277-2516 · www.promega.com
Part# TM396 Printed in USA.
Page 14 Revised 1/20
TM396.0120_EIVD_TM.qxd 1/27/2020 2:50 PM Page 14
To Next Page
Loading...