Task 6: Setting up the SmartStor
15
Advanced Setup
To configure your NAS system using Advanced Setup:
1. Go to the Main Window.
See “Opening SmartNAVI” on page 12.
2. Click the Setup Wizard icon. (A)
3. Click the Advanced Setup button. (B)
4. Choose Automatic (DHCP) or Manual network settings. (C)
If you chose Manual settings, type entries for each of the following
parameters in the fields provided: (D)
• Computer (NAS system) Name
• IP Address
• Subnet Mask
• Gateway
• Primary and Secondary DNS – optional
Click the Next button to continue. (E)
5. Choose the following values from their respective dropdown menus:
• Timezone
•Year
• Month
•Day
To Next Page
Loading...
