Need help?Do you have a question about the Promise Technology Pegasus3 R4 and is the answer not in the manual?
General| Internal | No |
|---|---|
| Chassis type | Tower |
| Cooling type | Active |
| Device class | Small & Medium Business |
| Fan diameter | 92 mm |
| Certification | CB, UL, cUL, TUV , BSMI, SPRING, BIS FCC, CE-EMC, VCCI, BSMI, RCM KCC |
| Product color | Black |
| LED indicators | Yes |
| Number of fans | 1 fan(s) |
| Airflow (imperial) | 70 cfm |
| Management platform | Pegasus Utility |
| Cable lock slot type | Kensington |
| RAID levels | 0, 1, 1E, 5, 6, 10 |
| Data transfer rate | 40 Gbit/s |
| Storage drive size | 3.5 \ |
| Storage drive capacity | 4000 GB |
| Storage drive interface | Serial ATA |
| Installed storage drive type | HDD |
| Supported storage drive types | HDD & SSD |
| Total installed storage capacity | 16 TB |
| Maximum supported storage capacity | - TB |
| Number of storage drives installed | 4 |
| AC input voltage | 100-230 V |
| AC input frequency | 50 - 60 Hz |
| Number of power supply units | 1 |
| Power supply unit (PSU) capacity | 250 W |
| Thunderbolt version | 3 |
| Thunderbolt ports quantity | 2 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 5 - 35 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 95 % |
| Cables included | AC, Thunderbolt |
Weight and Dimensions| Depth | 188 mm |
|---|---|
| Width | 248 mm |
| Height | 195 mm |
| Weight | 6800 g |
Provides detailed technical specifications for Pegasus3 models, including dimensions and certifications.
Introduces the external hardware components and front view of the Pegasus3.
Step-by-step guide for installing the Pegasus Utility software on macOS.
Introduces creating disk arrays and logical drives using the Pegasus Utility Wizard.
Instructions for downloading necessary software and drivers from the PROMISE website.
Procedures for formatting the Pegasus3 using the Pegasus Utility on Windows.
Instructions for safely disconnecting the Pegasus3 from a Windows system.
How to open and close the Pegasus Utility on Mac and Windows.
Procedures for viewing drive lists, information, and settings.
Covers viewing, creating, and managing disk arrays.
Details on viewing, creating, formatting, and managing logical drives.
Details different RAID levels (0, 1, 1E, 5, 6, 10, 50, 60) and their characteristics.
Guides on formatting logical drives using Pegasus Utility or Disk Utility.
Explains the meaning of different beep patterns and possible causes.
Details the status indicated by subsystem and drive carrier LEDs.
Covers troubleshooting for physical drive issues like status and replacement.
Troubleshooting for issues with disk arrays and logical drives, including degradation and offline states.
Provides contact information and required details for technical support.
To Next Page
