21
Installation and Setup for Windows UsersPegasus3 Product Manual
Step 2: Connect the Pegasus3 to your Windows computer
Insert one end of a Thunderbolt 3 cable into theThunderbolt 3 port on the Pegasus3 and
connecttheotherendofthecabletoaThunderbolt3portonyourcomputer.Makesurethecable
connectorisorientedcorrectlytotheportonboththePegasus3andthecomputer.Itshouldt
easily in place when correctly positioned.
Pegasus3 R6 connected to Windows computer
To power source
Power cable
Thunderbolt 3 cable
Thunderbolt 3 ports
Windows
computer
Make sure there is a
Thunderbolt 3 lightning bolt logo
on the cable connector
Thunderbolt 3 port on computer*
Pegasus3 R6
*MakesurethecomputerportisaThunderbolt3port.
TheportusesaUSBType-Cconnector,butthereisa
Thunderbolticonnexttotheport.