Promise Technology Pegasus3 R4 - S Ummary of the Setup Procedure

9
Installation and SetupPegasus3 Product Manual
Summary of the setup procedure
The setup procedure for the Pegasus3 is simple and easy. The device is shipped with hard disk drives
installedandaRAIDarraycongured,soitisjustnecessarytoplugitinandconnectthedevice.
However,youshouldinstallthePegasusUtilitysoftwareusedformonitoringandadministrationofthe
system.Macusers,pleasefollowthesetupprocedurehereorintheQuickStartGuide.
Thesetupprocessissummarizedbelow.
1. UnpackthePegasus3shippingpackage
2. Connect the power cord and power on the Pegasus3 R4/R6/R8.
3. ConnectthePegasus3toyourcomputerwithaThunderbolt3cable.
4. MacuserscanlocatethePegasusUtilityinstallationpackagelocatedonthedevice(Pegasus3is
shippedwithRAID5conguration)andinstallthemanagementsoftwareutility.Windowsusers
please skip ahead to “InstallationandSetupforWindowsUsers”onpage19.