Need help?Do you have a question about the Promise Technology Smartstor NS4600 and is the answer not in the manual?
General| RAID levels | 0, 1, 5, 10 |
|---|---|
| Storage drive size | 3.5 \ |
| Hot-swap drive bays | Yes |
| Storage drive capacity | 0 GB |
| Supported file systems | EXT3, FAT32 |
| Storage drive interface | Serial ATA II |
| Total installed storage capacity | 0 TB |
| Number of storage drives installed | 4 |
| Internal memory | 0.25 GB |
| Processor model | - |
| Processor frequency | 0.6 GHz |
| Maximum data transfer rate | 1000 Mbit/s |
| Supported network protocols | FTP, DHCP, NTP |
| Compliance industry standards | IEEE 802.3i, IEEE 802.3ab, IEEE 802.3u |
| Certification | RoHS, CE, FCC, UL, TUV |
| Data transfer rate | 3 Gbit/s |
| Dimensions (WxDxH) | 152.5 x 229.6 x 188.2 mm |
| Power requirements | 100 - 230 V/50-60 Hz |
| Networking features | Gigabit Ethernet |
| Compatible operating systems | Windows 2000/XP/2003/Vista Mac x 10.4 + Linux |
| USB 2.0 ports quantity | 2 |
| Ethernet LAN (RJ-45) ports | 1 |
| Power supply unit (PSU) capacity | 90 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
Weight and Dimensions| Weight | 2500 g |
|---|
Procedures for configuring the SmartStor via SmartNAVI, including One Click and Advanced Setup options.
Guide to mapping SmartStor folders as network drives on Windows operating systems.
Instructions on performing, scheduling, and restoring data backups using SmartNAVI.
Step-by-step instructions for replacing a faulty disk drive in the SmartStor.
Troubleshooting steps for resolving issues with SmartStor network connectivity and LED indicators.
To Next Page
