Promise Technology Smartstor NS4600 - Connecting to PASM; Browser Support; Finding the Smartstors IP Address

Chapter 2: Installation and Setup
23
Connecting to PASM
The Promise Advanced Storage Manager (PASM) software is factory-installed on
the SmartStor system. PASM runs in the browser on your PC. You can access
PASM:
• Directly in your browser. See page 25.
• From SmartNAVI. See page 26.
• Using Bonjour. See page 28.
Browser Support
Choose one of the following browsers to use with PASM:
Finding the SmartStor’s IP Address
To access the SmartStor in your browser, you must know
the SmartStor’s IP address. Use SmartNAVI for this
purpose.
Double-click the SmartNAVI icon in the Windows
application tray or Mac Dock (right).
• Internet Explorer 6 with SP2
• Internet Explorer 7
• Mozilla 1.7, 1.8
• Firefox 3
• Netscape Navigator 7.2, 8.1,
9.0
• Safari (Mac OS X) 2, 3
• Google Web (Windows)
SmartNAVI in
Windows
SmartNAVI in
Mac OS X