SmartStor NS4600 Product Manual
216
Setting up UNIX/Linux Access
Setting up UNIX/Linux Service
The Unix/Linux tab enables you to activate the Unix and Linux service for the
SmartStor.
With the Unix/Linux service, Unix/Linux PC users can access the SmartStor from
the network and use it for data storage.
To set up access from a UNIX or Linux PC:
1. Click the Administration topic and choose the File & Print icon to expand
the Tree. (A)
2. Click the Protocol Control icon (B), then click the UNIX/Linux tab (C).
3. Click the Enable option button (default). (D)
4. Optional. To join a NIS Domain, click the UNIX/Linux tab (A), then click the
Yes button beside Services. (B)
Note: If you join an NIS Domain, you automatically disable your AD Domain
settings. See “Setting up Windows Access” on page 213.
5. Enter the Domain name into the field provided. (C)
See your Network Administrator for help with this information.
6. Click the OK button to save your settings. (D)
The setting runs automatically.
To Next Page
Loading...
