Promise Technology Smartstor NS4600 - Directly; Restarting the Smartstor

SmartStor NS4600 Product Manual
158
Directly
To shut down the SmartStor, press and hold the power
button on the back of the SmartStor enclosure for five
seconds (top, right). The system status LED turns red,
then goes dark (bottom, right).
Restarting the SmartStor
To restart the SmartStor after a shutdown, press the
power button on the back of the SmartStor enclosure
(top, right).
When the SmartStor is fully booted:
•The system status LED turns blue (bottom, right)
•The buzzer beeps one time (if the buzzer is enabled)
See “Enabling and Disabling the Buzzer” on
page 262.