Promise Technology Smartstor NS4600 - Choosing a Default NAS System

Chapter 4: SmartNAVI
141
It takes about a minute to boot the SmartStor. When fully booted:
• The System Status LED turns blue.
• The buzzer beeps one time.
Choosing a Default NAS System
This feature sets the default NAS system (SmartStor) for the Main Window and
SmartNAVI tray icon. A default NAS activates several important functions,
including:
• Share Folder: Opening a Share Folder
• Backup Now: Performing an Immediate Backup
• Open Advanced Management: Starting the Advanced Storage Manager
• Event Notice: Enabling Event Notification
If you do not choose a default NAS, SmartNAVI sets the default NAS after you
first log on.
To set a default NAS:
1. Go to the Main Window.
2. Right-click the system in the Device List that you want to make the default.
3. Choose the Default NAS item.