SmartStor NS4600 Product Manual
132
Making Management Settings
This category includes the following topics:
• Configuring a NAS System (page 132)
• Changing Network Settings (page 137)
• Locating the SmartStor (page 139)
• Choosing a Default NAS System (page 141)
• Enabling or Disabling Event Notification (page 142)
• Viewing the System Event Log (page 143)
• Adding Application Plug-ins (page 144)
• Viewing a List of Plug-ins (page 148)
• Viewing Plug-in Version Numbers (page 149)
• Enabling and Disabling Plug-ins (page 150)
• Removing Plug-ins (page 153)
• Rebooting the SmartStor (page 154)
• Shutting Down the SmartStor (page 156)
• Restarting the SmartStor (page 158)
Configuring a NAS System
The Setup Wizard has two modes:
• One Click Setup – Loads a collection of default settings. Recommended for
most users.
• Advanced Setup – Enables you to make your own settings. Recommended
for advanced users.
One Click Setup
To configure your NAS system using One Click Setup:
1. Go to the Main Window.
2. Click the Setup Wizard icon.
3. Click the One Click Setup button.
Caution
Do NOT run the Setup Wizard on a NAS system that is already
configured! That action will delete your data and network drives!