Promise Technology Smartstor NS4600 - Sending a Test Message

SmartStor NS4600 Product Manual
258
• Click the No option button to disable authentication.
Note that most SMTP servers require authentication.
9. If you enabled authentication, to the following:
• In the User Name field, type the mail server account name.
• In the Password field, type the password of the mailer server account.
10. Click the OK button.
11. In the confirmation box, click the OK button.
Sending a Test Message
Before you can send a test message, you must set up SMTP authentication and
have at lease one email alert recipient.
To send a test email message:
1. Click the Administration topic and choose the Management icon to expand
the Tree.
2. In the Tree, click the Mail Alert icon.
3. Click the Setup tab.
4. Click the Test button.
5. In the confirmation box, click the OK button.