Promise Technology Smartstor NS4600 - Setting up NAS Replication

SmartStor NS4600 Product Manual
246
Setting up NAS Replication
To set up NAS replication:
1. Click the Administration topic and choose the Backup icon to expand the
Tree.
2. In the Tree, click the NAS Replication icon.
3. Click the Setup tab.
4. Under Settings, click the option button to assign a role to this SmartStor:
• Standalone – Use this option when you only have one SmartStor on
your network. This is the default setting and it disables NAS Replication.
• Primary – This SmartStor is the primary and the other SmartStor is the
backup server.
• Backup Server – The other SmartStor is the primary and this SmartStor
is the backup server.
5. Optional. If you chose Primary or Backup Server, type the IP address of the
other SmartStor on your network.
6. Under Schedule, click the option button for the schedule type you want:
• Disable – Disables NAS Replication
• Do it at once – Performs a NAS Replication when you click the OK
button.
• Daily – Sets the time of day when the NAS Replications happen.
• Weekly – Sets the time of day and day of the week when the NAS
Replications happen.
7. Click the OK button.