Promise Technology Smartstor NS4600 - Directly; Restarting the Smartstor; Locating the Smartstor

SmartStor NS4600 Product Manual
272
5. In the confirmation box, click the OK button.
Directly
To shut down the SmartStor, press and hold the power
button for five seconds. The system status LED turns red,
then goes dark (right).
Restarting the SmartStor
To restart the SmartStor after a shutdown, press the power
button on the front of the SmartStor chassis (right).
When the SmartStor is fully booted:
• The system status LED turns blue (right)
• The buzzer beeps one time (if the buzzer is enabled)
See “Enabling and Disabling the Buzzer” on page 262.
Locating the SmartStor
If your SmartStor in is on a rack with other equipment and
you need to locate it quickly, this function will assist you.
To locate the SmartStor:
1. Click the Administration topic and choose the
System icon to expand the Tree.
System Status LED
Power Button
System Status LED