Promise Technology Smartstor NS4600 - Managing the System; Setting System Date and Time

SmartStor NS4600 Product Manual
268
Managing the System
This category includes the following topics:
• Setting System Date and Time (page 268)
• Adjusting for Daylight Saving Time (page 269)
• Running the Network Time Protocol (page 269)
• Viewing the Results of NTP Synchronization (page 270)
• Rebooting the SmartStor (page 270)
• Shutting Down the SmartStor (page 271)
• Restarting the SmartStor (page 272)
• Locating the SmartStor (page 272)
• Viewing System Information (page 273)
• Viewing Enclosure Information (page 274)
• Enabling the Smart Fan (page 275)
Setting System Date and Time
To set the date and time on the SmartStor:
1. Click the Administration topic and choose the System icon to expand the
Tree.
2. In the Tree, click the Date / Time icon.
3. Click the Setup tab.
4. From the dropdown menus, choose the time and date values.
5. Click the OK button.
6. In the confirmation box, click the OK button.