To setup the Vess A6120 system, perform these hardware and conguration
tasks in order:
• Task 1: Unpack device
• Task 2: Mount Vess A6120 in a standard rack
• Task 3: Remove front bezel and install hard disk drives
• Task 4: Management connections
• Task 5: Connect the power and power on system
• Task 6: Login to Windows
• Task 7: Login to WebPAM PROe
• Task 8: Create Logical Drives
The Vess A6120 box contains the following items:
• Vess A6120
• Front bezel secure cover
• 1.5m (4.9 ft) Power cord
• Screws for disk drives
(20 pieces for 4 bays)
• Sliding rail assembly for rack mounting
Note
The Product Manual and this Quick Start Guide, in PDF format, are
found on the desktop after booting up and logging in
To Next Page
Loading...
