Pronomic DJM500 - Specifications; Equalizer Specifications; Digital Effects Processor; System Specifications

EQUALIZER
DIGITAL EFFECTS PROCESSOR
SYSTEM SPECIFICATIONS
POWER SUPPLY
DIMENSIONS/WEIGHT
Stereo Low +12 dB/-32 dB @ 50 Hz
Stereo Mid +12 dB/-32 dB @ 1.2 kHz
Stereo High +12 dB/-32 dB @ 10 kHz
Mic Low +15 dB/-15 dB @ 80 Hz
Mic Mid +15 dB/-15 dB @ 2.5 kHz
Mic High +15 dB/-15 dB @ 12 kHz
Kill Low -54 dB @ 80 Hz
Kill Mid +44 dB @ 1 kHz
Kill High +26 dB @ 10 kHz
DSP 24-bit
A/D-D/A converter 24-bit Sigma-Delta,
64/128-times oversampling
Sampling rate 46.875 kHz
Mains voltages USA/Canada
120 V~, 60 Hz
Europe/u.k./Australia
230 V~, 50 Hz
Japan
100V~, 50-60 Hz
General export model
120/230 V~, 50-60 Hz
Power consumption 32W
Fuse 100-120 V~: T 1A H
200-240 V~: T 500 mA H
Mains connection Standard IEC receptacle
Dimensions (WxDxH) 390mmx340mmx115mm
15.354″x 13.386 x 4.528″ ″
Weight 5.5kg
(9)
Signal-to-noise ratio > 80 dB (Line)
Crosstalk > 70 dB (Line)
Distortion (THD) < 0.03%
Frequency response 10 Hz - 55 kHz, +0/3 dB