Diagram
8
Diagram
9
Diagram
10
Diagram
11
Replacing the Lower Propeller Blade
When you tighten the screw you should
test the blade to make sure that it still has
free movement. If the blade cannot move
freely, slightly loosen the screw.
Remove the broken blade and carefully
replace with a new one.
Unscrew the lower two propeller
safety screws on the broken blade
side. Using a screwdriver
turn counter clockwise.
Carefully tighten the two lower
safety screws using the
screwdriver.
Diagram
12
Please note the design of the lower
blade.
Lower Blade
9
To Previous Page
Loading...
