8880429 1,500 LB 120V AC ELECTRIC WINCH V1.0
2 For technical questions call 1-800-665-8685
SPECIFICATIONS
Current Rating Based on load’s weight. See Table 2.
Load Capacity 1,500 lb
Cable Length 35 ft
HP Rating 1.3 HP
Gear Ratio 262:1
Braking Automatic Load Holding
Control Type Tethered Control
Fairlead Steel Hawse
Full Load Line Speed (FPM)
Gear Train 2-stage planetary
Cable Material Galvanized Steel
IP Rating IP44
INTRODUCTION
The 1,500 lb, 120V AC Electric Winch is strong enough for use in a
shop or garage to pull vehicles onto a lift or frame straightener. The
unit has a tethered remote, overload protection to avoid heat damage
and a 35 ft steel cable with a drop-forged sling hook.
1,500 LB 120V AC
ELECTRIC WINCH
To Next Page
Loading...