10 perating & Safety Instructions
4.3 Using Your Steamer
NOTE: Ensure the area you are steaming in is well ventilated.
Once steam is emitting from the nozzle, allow the hose and nozzle
to get hot for approximately 30 seconds before using the steamer.
This reduces any condensation build-up.
any excess condensation before use and repeat periodically when
steaming garments.
4.4 Safety Filler Cap
this occurs turn off immediately to ensure no damage is caused to
• The steamer needs rinsing out and descaling to remove build up of
sediment or limescale
• The steamer hose is blocked, kinked or restricted
4. OPERATING INSTRUCTIONS (CONTINUED)
steamer using the green on/off switch and disconnect
the power supply.
Never leave hose assembly on the oor as this
will cause a trip and burn hazard to the user
and others and could damage the hose.
To Next Page
Loading...
