15
6. CARE AND MAINTENANCE
To ensure a long and trouble free life of your steamer it is essential that
of sediment and limescale. Descale regularly to ensure no unnecessary
on the heating element if not maintained properly; this will cause reduced
performance, irreparable damage to the element and void your warranty.
6.2 Cleaning your Steamer
Disconnect from the power supply.
Remove steam hose and telescopic pole assembly.
Steamer must be disconnected from the power supply.
The water in the steamer must be allowed to cool to a
temperature which will not cause injury before emptying.
NOTE: The steamer should be emptied through the steam outlet (not the
ller inlet) into a ground level drain where possible to avoid raising the
steamer up and emptying into a sink.
Start by emptying any residue water from the steamer.
fresh water and empty again, repeat procedure until the water runs clear.
Clean the outside of the steamer with a damp cloth. Do not use any
detergents or polish.
It is recommended the steamer be descaled using a non-aggressive descaler
at least every 2 months. Descaling frequency is dependent upon usage and
water hardness.
For details on suitable descalers, please contact Propress. We recommend
the use of Propress Descaler which can be purchased by calling Propress on
020 8417 0660 or visiting propress.co.uk.
To Next Page
Loading...
