16 perating & Safety Instructions
6.3 Descaling your Steamer
Before descaling, carry out 6.2 Cleaning your Steamer to remove as
much loose sediment as possible.
follow directions.
Dissolve/dilute descaler in warm water, or as directed by the
manufacturer, ensuring the correct water volume to descaler ratio is
followed. Pour the diluted descaler solution into the steamer.
for a minimum of 3 hours. For best results leave to descale overnight.
completely clear.
Failure to maintain your steamer will void its warranty.
NOTE: the water in the steam generator must be allowed to cool to a
temperature which will not cause injury before emptying.
In addition to mandatory electrical tests, regularly check the condition
of the steamer's plug, cable and cable restraint for damage. If any
approved service agent for repair. Ensure all warning labels are legible.
6. CARE AND MAINTENANCE (CONTINUED)
When descaler is left in the steamer, clearly label your
steamer so no one attempts to use it.
To Next Page
Loading...
