Prorelax SUPER DUO - Battery Insertion and Replacement

14
Inserting/Changing the Batteries
1. Open the battery compartment at the back of the device by pushing the
battery cover labelled “Open” downward (this area features raised marks for
easy identi cation).
2. Insert 3 AAA (1.5 V) batteries in the battery compartment; make sure to match
up the symbols (+/–).
3. Close the battery cover by carefully placing the stud into the slot in the rear
area and sliding it upward, applying slight pressure.
4. Follow the same procedure when replacing the battery at a later date.
Note: for important precautions regarding the batteries, please be informed:
• Alwaysuseonly3x1.5V(AAA)batteries.
• Keepawayfromchildren.
• Donotrecharge.
• Donotshort-circuit.
• Donotthrowintoare.
• Pleaserecycle.Donotdisposeofoldbatterieswithyourhouseholdwaste;
dispose of them safely at your recycling centre or business where the batteries
were purchased.
Step by step operation guide for training