Prorelax SUPER DUO - Troubleshooting Common Issues

25
TROUBLE SHOOTING
Always check the unit and accessories before use to prevent damage and defects;
these are some of the simple checks:
1.Makesurethebatteryhassucientchargeandisnotcorroded.
2.Makesurethecablesttightlyintotheconnectionsocketsofthedevice.Thetable
below shows some common defects. If you cannot remedy the defects as described,
contact your unit provider if it is not possible to remedy in the manner described.
Trouble Shooting
Defect Cause Remedy
The device does not
turn on
The device turns on
and then o again
The device turns on,
but does not
generate
electric pulses
The unit does not
turn on even though
new batteries have
been inserted
No battery or bad battery
Replace battery
Battery not inserted
properly
Insert battery
again Replace battery
Battery life expired
Replace battery
Cable broken
Replace cable
Cable not connected
Properly
Connect cable properly
Connect customer service.
Treatment time has
Expired
Switch unit to the OFF
Position and switch back on.