Prorelax SUPER DUO - Electromagnetic Compatibility

27
ELECTROMAGNETIC COMPATIBILITY
•Thedevicecomplieswithcurrentspecicationswithregardtoelectromagneticcom
patibility and is suitable for use in all premises, including those designated for private
residentialpurposes.Theradiofrequencyemissionsofthedeviceareextremelylowand
in all probability do not cause any interference with other devices in the proximity.
•Itisrecommendedthatyoudonotplacethedeviceontopoforclosetootherelectronic
devices. Should you notice any interference with other electrical devices, move the
device or connect it to a dierent socket.
•Radioequipmentmayaecttheoperationofthisdevice.
INFELECTROMAGNETIC COMPATIBILITY INFORMATION
Technical Specications
Guidance and manufacturer’s declaration – electromagnetic emissions
Emissions
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic
emissions
IEC 61000-
3-2
Voltage
uctua-
tions/icker
emissions IEC
61000-3-3
Compliance
Group 1
Class B
Not applicable
Not applicable
Electromagnetic environment-- guidance
TheTENS+EMSSUPERDUOisintendedforuseintheelectromagneticenvironment
speciedbelow.ThecustomerortheuseroftheTENS+EMSSUPERDUOshouldassure
that it is used in such an environment.
TheTENS+EMSSUPERDUOissuitableforuseinall
establishments, including domestic establishments
and those directly connected to the public
low-voltage power supply network that supplies
buildings used for domestic purposes.
TheTENS+EMSSUPERDUOusesRFenergy
only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any
interferenceinnearbyelectronicequipment.