25
6. DRIVE RIDING MOWER OFF THE PALLET
Fully charge batteries
before the rst time you use the mower.
A. After installing the steering wheel
and seat, increase the tractor's cutting
deck height to its maximum level.
B. Remove the six bolts near the front
of the riding mower's pallet (Fig 6A)
and remove the wooden cross plank
from the base pallet. (Fig 6B).
C. Follow the instructions in section
CONTROLS AND STARTUP and carefully
drive the Riding Mower forward off the
wooden base platform. (Fig 6C)
To prevent damaging the blade deck and blade, move the cutting deck to its maximum
height before driving the riding mower off the wooden base platform. Be careful when
performing this delicate unpacking operation.
To Next Page
Loading...
