ProScan PLCD3992A User Manual

- 9 -
Rear View Connections
1. HEADPHONE – This connection is for headphones to be attached to the TV.
2. Audio In - This connection port is for people who want to provide audio to the TV
when using a PC or a DVI video device. The sources use 3.5mm mini-jack audio
cable.
3. TV – This connection is for digital or analog cable without the cable box or over-the-
airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital
channels. This connection uses coaxial RF cable.
4. VGA - This connection port connects to a PC for video using VGA cable. Be sure to
connect your audio cable to the VGA Stereo input if you want sound out of VGA
video source.
5. Video – Video connects to devices that use composite video cables such as VCR or
DVD player or Wii™. Connect the yellow for video and the red / white for audio.
This port shares the audio jacks with YPbPr.
6. HDMI– HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD
player, or HD cable / satellite set-top box. This connection port receives pure digital
audio and high definition signal through one single cable. This port also can accept
a HDCP video device for video.
7. USB – USB connects to USB flash drives for playing music and picture. The USB
port is also used for updating the TV’s firmware.

ProScan PLCD3992A Specifications

General

Brand	ProScan
Model	PLCD3992A
Category	LED TV
Language	English