How to fix ProScan PLDED3273A-B LED TV not receiving enough channels?
If your ProScan LED TV cannot receive enough channels through the ATSC/NTSC tuner, it may be because the TV’s tuner signal is lower than 65 %. To resolve this, try changing the direction of your antenna and rescanning your channels. If you have cable, contact your cable company to inquire about the signal strength of your local cable.
Why does my ProScan LED TV have sound but no picture?
If your ProScan LED TV has audio but no picture, ensure that both your video and audio cables are correctly connected. Also, confirm that the TV’s tuner signal is not lower than 65 %.
What to do if my ProScan LED TV has picture but no sound?
If your ProScan LED TV displays a picture but has no audio, ensure the audio cable is properly connected. Also, check and readjust the volume using the remote control. If the TV’s tuner signal is lower than 65 %, this can also cause the problem, so ensure that the signal is adequate.
How to fix no picture on ProScan LED TV?
If your ProScan LED TV shows no picture, ensure the power cord is correctly connected and the power is turned on. Also, verify that the video cable is properly connected. Select the correct input signal source using the source button, ensuring it matches the cable connection.
Warns against opening the casing and advises servicing by qualified personnel.
Warns about high voltages and advises against opening the product casing.
Advises against exposing the unit to rain or moisture and placing liquid-filled objects on it.
Warns against inserting objects into slots and spilling liquids on the receiver.
Advises against direct sunlight, heat sources, blocking vents, and crushing the power cord.
Warns against leaning on or pushing the product, especially concerning children.
Warns against placing the unit on unstable surfaces to prevent injury or damage.
Warns that the LED panel is glass and breakable, advising caution with broken glass.
Steps for connecting a digital cable or antenna to the TV for reception.
Detailed steps for connecting a DVD player using component cables (YPbPr).
Steps for connecting the audio using RCA cables for component connection.
Steps for connecting a Wii console using composite video cables.
Steps for connecting the audio from the Wii using RCA cables.
Explains the function of each button on the remote control.
Details how to adjust picture settings like mode, contrast, brightness, color, tint, and sharpness.
Table listing common issues like no picture, abnormal colors, and dark picture with solutions.
Covers issues like slow power, no sound on PC, HDCP errors, and picture distortion.
Addresses picture quality, pixel defects, time sync, and big black boxes on screen.
Discusses channel switching volume, noise, letterboxing, and power saving issues.
General| Screen Size | 32 inches |
|---|---|
| Display Technology | LED |
| Resolution | 1366 x 768 |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Refresh Rate | 60 Hz |
| Audio Output | 10W x 2 |
| Aspect Ratio | 16:9 |
| Inputs | HDMI, Composite |
To Next Page
