ProScan PSB3787W User Manual

BLUETOOTH OPERATION
10
5. After successful paired, the mode indicator on the sound bar will stop blinking.
6.
During playback:
~ Press the or button on remote control to skip tracks.
~ Press the button on remote control to pause; press it again to resume.
1. Power on the sounbar and subwoofer and pair them as previously explained.
3.
Power on the external Bluetooth-enabled device, then enter Bluetooth mode and try
searching the unit.
NOTE: The unit will be automatically connected with the last connected Bluetooth device
if their Bluetooth function are activated and they are in working range.
13
4.
When
Pro PSB3787W
appears, select it and make connection.
2.
Press the BT button on remote control, or press the POWER/SOURCE button on the
sounbar repeatedly to switch to the Bluetooth mode, the indicator on front of the
soundbar will turn blue and blink.
7.
Press and hold the button to disconnect current connection and go into a pairing
mode, you can pair to new devices with this sound bar.

ProScan PSB3787W Specifications

General

Brand	ProScan
Model	PSB3787W
Category	Speaker System
Language	English