Installer Manual
Non-Programmable Thermostats
PSP1100
Up to 1-heat / 1-cool
PSP2100 Heat Pump, Up to 2-heat / 1-cool
1 Specifications 2 Safety Warnings 3 About Your Thermostat
4 Preparation & Installation 5 Sample Wiring & Jumpers
6 Test Operations 7 Troubleshooting 8 Warranty
Follow Installation Instructions carefully. Disconnect Power to the
Heater/Air Conditioner before removing the old thermostat and
installing the new thermostat.
WARNING
1 Specifications
model PSP1100
• Manual-changeover
• 1 heat, 1 cool
• Non-programmable
• Compatible with gas/elec, millivolt, and heat pump systems with no aux heat
• Battery or 24vac system powered
model PSP2100
• Manual-changeover
• 2 heat, 1 cool
• Non-programmable
• Compatible with heat pumps with 2nd stage aux heat
• Battery or 24vac system powered
© Copyright 2021, All Rights Reserved
To Next Page
