Protec EVX-228 - EVX-228 Technical Specifications

RDM0021/0 Page 15 of 16 © 2017 Protec Fire Detection plc
9.0 Technical Specification
Product Code
EVX-228
Power Supply and Charger
AC Input
230Vac+10%- 20% 50/60Hz
Internal power supply
12Vdc nominal
Supply and battery
Monitored open, Short, Fuses
Protection
Deep discharge, Short, Thermals
Temperature
compensation
Yes
Battery information
Space for Up to 1x 12V 7AH VRSLA
Mains fuse
1A HRC(T)
Battery fuse
Self Resetting PTC
Max charge current
500mA
Inputs
Number of lines
Between 2 and 8
Remote enable
Short to use
End of line monitoring
10KΩ 0.6watt resistor
Relay outputs
Number and type
2: Fault and In use, volt free 30Vdc 1A
Controls
Number and type
8 push button zone keys
Indication
Number and type
8x RGB Line indicators
3x PSU Status Indicators
1 x CPU Fault Indicators
1x General Fault Indicator
1x RGB Mode Indicator
1x User Status Indicator
Enclosure Details
Back box finish
RAL 7035 Grey
Dimensions
350 x 300 x 95
Entries
14 knockouts top, 2x rear slots
Flush Cutout
352 x 302 x 85 deep