3.2 ANNUAL MAINTENANCE (FALL) (CONT’D)
15
2. Clean the centrifugal fan wheels (cont’d)
3. Put the components back in place:
• Fan assembly (fan motor wires, wing nut)
• Recovery core
• Filters
• Door
4. Reconnect the power supply.
VD
1
C
Remove the fan assembly.
D
Check for any dust accumulation
on the blades.
E
Clean with a small brush
if necessary.
VD
1
VD
1
CAUTION
Do not oil the motor! It is already permanently
lubricated.
To Next Page
Loading...
Need help?
General
