Page | 17
HAZARDS AND SAFE USE OF THE MACHINE AND EQUIPMENT
There are many hazards posed when operating an EVO Track Machine or the equipment
attached to it. When using the machine or equipment please be aware of the following:
• This machine was not designed for use on a public highways, schools, parks or
any other place where the general public have access to it. If using the machine in
these areas, a full and detailed risk assessment should be carried out and
documented. Once completed, the area of interest or where the work will
commence should be isolated from public access and deemed a dangerous area
with clear warning signs and markings.
• A competent person should be with the machine at all times when the engine is
running so that in the event of an emergency the engine can be stopped.
• Never leave the key in the ignition when unattended.
• Never leave the machine with the weight in the raised position
• When the machine is stationary, please apply the park brake to prevent self-
tracking in the event of a control failure or accidental movements. These machines
are designed for off road use in low grip conditions. They have the ability to drive
over and crush people or animals with ease.
• Some EVO Track Machines have a very high tele masts option so extra caution
should be taken when working near or under power lines. One other major factor
to consider is lightning strikes when working out in the open in poor conditions.
• Take extra caution when working in a transverse position perpendicular to the slop
of the hill. When moving around the machine in these conditions always, walk
uphill and across the high side.
• Where possible, always use the post driving equipment on the high side to help
balance the machine and prevent a roll over situation.
• If the machine has the extending track base option, always extend the tracks fully
in these conditions giving a wider footprint.
These machines are heavy, some are almost 5 tons and can travel at 30KPH with a high
center of gravity. Please take extra care when using them. We at Protech Machinery
want you to get the most out of your machine, but in a safe and responsible manner.
To Next Page
Loading...