EasyManua.ls Logo

protech Prox-1260 M4 - Page 10

protech Prox-1260 M4
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 Introduction
Page: 1-4
Prox-1260 USER
S MANUAL
z DISPLAY :
Built-in VIA VT8606, supports CRT, TTL & LVDS.
Integrated S3®’s Savage4™ 2D/3D/Video Accelerator.
Optimized Shared Memory Architecture (SMA).
2~32 MB Frame Buffer using system memory.
Supports simultaneous display of CRT & LCD.
Interface:
One 15-pin connector supports for CRT Monitor.
One 41-pin connector support 18 bit or 24 bit panel for TTL.
One 30-pin connector support 2x18 bit LVDS panel.
z WATCHDOG :
I / O port 0443H to Enable watchdog.
I / O port 0441H to Disable watchdog.
Selectable for Reset / NMI Watchdog function.
Time-out timing select 0 / 8 / 16 / 24 / 32 / 40 / 48 / 56 / 64 / 72 / 80 / 88 /
96 / 104 / 112 / 120 sec +/- 25%.
z IDE INTERFACE :
One EIDE port supports Ultra DMA-100/66/33.
One channel supports up to two devices.
z FLOPPY DISK DRIVER INTERFACE :
Supports up to two Floppy Disk Drives, 3.5" and 5.25" (1.44M / 2.88M).
z USB CONNECTOR :
Universal Serial Bus Connector, supports up to two USB1.1 ports.
z LAN ADAPTER :
Realtek 8100BL PCI Fast Ethernet
10/100 Base-TX PCI-BUS
z SERIAL PORT :
Two high speed 16550 Compatible UARTs with Send / Receive 16 Byte
FIFOs; COM1 for RS-232; COM2 for RS-232/422/485
COM1 with 9-pin D-SUB connector on board
COM2 with two 5-pin boxheader connector on board
Infrared Communications port option on the COM2.

Related product manuals