Chapter 4 Award BIOS Setup
Prox-1260 USER
′
S MANUAL
Page: 4-19
4-7. POWER MANAGEMENT SETUP
Choose〝POWER MANAGEMENT SETUP〞option on the main menu, a
display will be shown on screen as below :
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI function
►Power Management
[Disabled]
[Press Enter]
Item Help
PM Control by APM
Video Off Option
Video Off Method
MODEM Use IRQ
Soft-off by PWRBTN
►Wake Up Events
[Yes]
[Suspend -> Off]
[V/H SYNC+Blank]
[3]
[Instant-off]
[Press Enter]
Menu Level ►
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Power Management Setup Screen
The “Power Management Setup” allows the user to configure the system to
the most effectively save energy while operating in a manner consistent with
your own style of computer use.
ACPI FUNCTION:
Users are allowed to enable or disable the Advanced Configuration and
Power Management (ACPI).
POWER MANAGEMENT:
This item allows the user to select the type or degree of power saving and is
directly related to HDD Power Down, Doze Mode and Suspend Mode.
PM CONTROL BY APM:
If Advanced Power Management (APM) is installed on your system, selecting
Yes gives better power savings.
To Next Page
Loading...
Need help?
General
