Chapter 1 Introduction
Page: 1-6
Prox-1260 USER
′
S MANUAL
z INTERRUPT LEVELS :
15
z OPERATING TEMPERATURE :
0 to 60°C (32°F to 140°F)
z SYSTEM POWER REQUIREMENT :
DC Voltage: +5V Standby, minimum +4.75V, maximum +5.25V.
DC Ampere: 0.04A. (ATX Support)
DC Voltage: +5V, minimum +4.75V, maximum +5.25V.
DC Ampere: 2.4A.
DC Voltage: +12V, minimum +11.4V, maximum +12.6V.
DC Ampere: 0.2A.
z BOARD DIMENSION :
185mm x 122mm (7.28” x 4.8”)
z BOARD NET WEIGHT :
280g (0.616 lb)
1-3. SAFETY PRECAUTIONS
Follow the messages below to avoid your systems from damage:
1. Keep your system away from static electricity on all occasions.
2. Prevent electric shock. Don‘t touch any components of this card when
the card is power-on. Always disconnect power when the system is not
in use.
3. Disconnect power when you change any hardware devices. For instance,
when you connect a jumper or install any cards, a surge of power may
damage the electronic components or the whole system.
To Next Page
Loading...
