protech Prox-1260 M4 - Page 21

Chapter 2 Hardware Configuration
Prox-1260 USER ′ S MANUAL
Page: 2-9
2-9. INVERTER CONNECTOR
INV1 : Inverter Connector
The pin assignment is as follows:
PIN ASSIGNMENT
1 +12V
2 +12V
3 GND
4 VCC
5 GND
6 ENABKL (Inverter backlight
ON/OFF control signal)
2-10. POWER LED CONNECTOR
JP4 (1-3) : Power LED Connector
The pin assignment is as follows:
PIN ASSIGNMENT
1 PW_LED
3 GND
2-11. RESET CONNECTOR
JP4 (9-10) : Reset Connector.
The pin assignments are as follows :
PIN ASSIGNMENT
9 GROUND
10 RESET
JP4
PW_LED
JP4
RST
1