Appendix C Troubleshooting
Page: C-8
Prox-1260 USER
′
S MANUAL
4E : If there is any error detected (such as video, kb....), show all the error
messages the screen & wait for user to press <F1> key.
4F : 1. If password is needed, ask for password.
2. Clear the Energy Star Logo (Green BIOS only).
50 : Write all CMOS values currently in the BIOS stack area back into the CMOS.
52 :1.Initialize all ISA ROMs.
2. Later PCI initializations (PCI BIOS only).
-assign IRQ to PCI devices.
-initialize all PCI ROMs.
3.PnP Initializations (PnP BIOS only).
-assign I/O, Memory, IRQ & DMA TO PnP ISA devices.
-initialize all PnP ISA ROMs.
4. Program shadows RAM according to Setup settings.
5. Program parity according to Setup setting.
6. Power Management Initialization.
-Enable/Disable global PM.
-APM interface initialization.
53 :1.If it is NOT a PnP BIOS, initialize serial & parallel ports.
2. Initialize time value in BIOS data area by translate the RTC time value into
a timer tick value.
60 : Setup Virus Protection (Boot Sector Protection) functionality according to
Setup setting.
61 : 1. Try to turn on Level 2 cache.
Note : if L2 cache is already turned on in POST 3D, this part will be skipped.
2. Set the boot up speed according to Setup setting.
3. Last chance for Chipset initialization.
4. Last chance for Power Management initialization (Green BIOS only).
5. Show the system configuration table.
To Next Page
Loading...
Need help?
General
