Protherm Panther 24 KOV

To Next Page

Panther 24 KTV / 24 KOV / 28 KTV

The boiler’s Serial No. is shown on the plate which is attached to the rear side of the

control panel. The control panel is accessible after removing the front cover.

In section “Operating Instructions” you will ﬁ nd description of the boiler’s main functi-

ons and guidelines how to handle the boiler safely. Section “Installation Instructions” is

for skilled workers only.

Obsah

Table of contents

Introduction........................................... 2

OPERATING INSTRUCTIONS

Controls and signals............................. 4

Selacting Read mode ........................... 5

Selecting Setup mode ......................... 5

Schematic diagram of boiler control ..... 7

Error codes .......................................... 8

Starting the boiler up and shutting it down

.............................................................. 9

Boiler control ....................................... 10

Protection functions............................. 12

Service and maintenance ................... 13

Warranty and warranty conditions ...... 14

Technical parameters ......................... 15

Connection dimensions ...................... 18

Usable pressure into system ............... 19

INSTALLATION INSTRUCTIONS

Boiler operation scheme...................... 20

Introduction ......................................... 21

Installation distances ........................... 22

Delivery ............................................... 23

Special delivery ................................... 23

Delivery completeness ....................... 23

Preparing for installation ..................... 24

Installing the boiler .............................. 25

Air supply and combustion gases removal

system for KTV boilers ........................ 29

Electrical wiring ................................... 33

Converting to different fuel ................ 34

Electrical wiring diagram .................... 35

Need help?

Do you have a question about the Protherm Panther 24 KOV and is the answer not in the manual?

Summary

Boiler Introduction and Safety

Boiler Overview and General Safety Guidelines

Introduction to the boiler, its function, and essential safety precautions for operation.

Equipment and People Safety Standards

Details safety measures, compliance with directives, and potential hazards for secure user interaction.

Operating Instructions

Control Panel and Signals

Explains the control panel layout, buttons, LEDs, and display for monitoring and adjusting boiler settings.

Operating Mode and Settings Selection

Guides on selecting read modes, setup modes, and specific settings like hot water temperature.

Equithermal Control Configuration

Instructions for setting up equithermal control, including curve slope and parallel shift adjustments based on outdoor temperature.

Error Codes and Troubleshooting

Explains various error codes (F0-F5) and their meanings for effective boiler troubleshooting.

Boiler Start-up, Shut-down, and Control

Details procedures for starting, shutting down, and controlling the boiler, including safety shutdown protocols.

System Protection Functions

Details protection mechanisms like anti-freezing, pump protection, and handling power failures.

Technical Specifications and Diagrams

Technical Parameters: Model 24 KOV

Comprehensive technical data for the 24 KOV model, including gas, heating, and electrical specifications.

Technical Parameters: Model 24 KTV

Detailed technical specifications for the 24 KTV model, covering input, output, efficiency, and operating ranges.

Technical Parameters: Model 28 KTV

Comprehensive technical data for the 28 KTV model, including performance and operational parameters.

Connection Dimensions and Pressure Curves

Illustrates connection dimensions for boiler models and shows usable pressure curves for the heating system.

Boiler Operation Scheme

Provides a visual schematic diagram of the boiler's internal components and their functional relationships.

Installation Instructions

Installation Introduction and Requirements

General guidelines for installation, environmental conditions, and compliance with relevant standards and regulations.

Delivery, Preparation, and Mounting

Covers boiler delivery, accessories, system preparation, and the physical process of mounting the boiler.

Pipe Connections, Gas Supply, and Safety

Instructions for connecting water and gas pipes, safety valve, and gas supply connection.

Combustion Gases, Electrical Wiring, and Fuel

Details air supply, exhaust systems, electrical wiring, safety measures, and fuel conversion procedures.