To Next PageTo Next Page
Need help?Do you have a question about the Protherm Panther 28 KTV and is the answer not in the manual?
Details the boiler's control panel, buttons, LEDs, and display for operation.
Explains how to view parameters and set boiler operating values.
Guides on setting heating curves and parallel shifts for optimal climate control.
Illustrates the control logic for setting different boiler functions.
Lists and explains common error codes, their causes, and corrective actions.
Provides essential steps for safely starting and shutting down the boiler.
Explains control using room control units and equithermal mode.
Details the COMFORT mode for faster hot water supply and preheating.
Describes safety features like freezing, pump, and anti-cycling protection.
Covers regular maintenance tasks, cleaning, and topping up water.
Outlines the terms and conditions of the product warranty.
Lists detailed technical specifications for various boiler models.
Provides physical dimensions and connection point details for specific boiler models.
Details dimensions for Model 28 KTV and graph on system pressure.
Shows a comprehensive diagram of the boiler's internal components and connections.
General introduction to boiler installation, compatibility, and environmental requirements.
Specifies required clearances around the boiler for safe installation and maintenance.
Lists standard boiler delivery items and optional accessories available.
Guidance on preparing the system and installation site before mounting.
Detailed steps for physically mounting the boiler and connecting all pipes.
Specifies the correct operating pressure for the heating system and expansion vessel.
Details installation of expansion vessel, safety valve, and gas supply connection.
Instructions for filling the heating system with water and draining the boiler.
Requirements for air intake and exhaust ducting for KTV boiler models.
Rules for terminating ducting on facades, special scenarios, and vertical outlets.
General safety precautions and instructions for electrical installation.
Information on modifying the boiler to use propane gas instead of natural gas.
Illustrates the boiler's electrical connections and component layout.
General| Output Power | 28 kW |
|---|---|
| Fuel Type | Natural Gas / LPG |
| Mounting | Wall-mounted |
| Combustion Chamber Type | Closed |
| Height | 740 mm |
| Depth | 310 mm |
| Max. Working Pressure | 3 bar |
| Flue Diameter | 60/100 mm |
| Type | Wall-mounted boiler |
| Hot Water Output | 28 kW |
| Number of Circuits | 2 |
| Gas Connection | G 3/4 |
| Heating Circuit Connection | G 3/4 |
| Hot Water Connection | G 1/2" |
| Expansion Tank Volume | 7 l |
