What to do if Protherm Boiler CH pressure sensor fails and pressure doesn't rise after pump starts?
If your Protherm Boiler displays error codes due to a permanent failure of the CH pressure sensor and no pressure increase is detected after starting the pump, first press the RESET key. If the issue persists, it is recommended to contact a qualified technician.
What to do if thermal fuse fails in Protherm Boiler primary exchanger?
If your Protherm Boiler indicates a thermal fuse failure in the primary exchanger, begin by pressing the RESET key. If the problem continues after this step, it is necessary to contact a qualified technician.
How to fix an error in the SHE entry sensor of a Protherm Boiler?
If your Protherm Boiler shows an error in the SHE entry sensor, try pressing the RESET key. If the error persists after resetting, contact a qualified technician for assistance.
What to do if Protherm Boiler charger pump has an error?
If your Protherm Boiler displays an error related to the charger pump, your first step should be to press the RESET key. If the error continues to appear after doing this, contact a qualified technician.
What to do if Protherm Boiler anode tester has an error?
If your Protherm Boiler shows an error with the anode tester, press the RESET key. If the error remains after resetting, it's best to contact a qualified technician.
How to fix an error in the APC module sensor of a Protherm Boiler?
If your Protherm Boiler indicates an error in the APC module sensor, start by pressing the RESET key. If the error persists after the reset, contact a qualified technician for further assistance.
Introduction to the manual and its importance for safe installation and use.
Introduction to the manual and its importance for safe installation and use.
Guidance for initial use of the equipment, assuming prior installation.
Instructions for installation and first start-up by authorized service personnel.
Overview of PANTHER boilers and their compatibility with heating systems.
Instructions for installation and first start-up by authorized service personnel.
Procedure for turning off the boiler for extended periods, including frost protection.
Guidance on keeping the manual accessible for current and future users.
Guidance on keeping the manual accessible for current and future users.
Key to understanding warning symbols (DANGER, CAUTION, IMPORTANT) used in the manual.
General safety rules, including avoiding tampering, ensuring qualified maintenance, and keeping children away.
Emergency steps to take if a gas leak is detected, prioritizing safety.
General safety rules, including avoiding tampering, ensuring qualified maintenance, and keeping children away.
Conditions for warranty validity and manufacturer's responsibilities.
Information on the boiler's warranty coverage and conditions.
Conditions for warranty validity and manufacturer's responsibilities.
Information on the recyclability of boiler components and packaging.
List of items included with the boiler, with diagrams and labels.
General introduction to the boiler's functions and operation.
General introduction to the boiler's functions and operation.
Procedure for switching the boiler on and off using the main switch.
Explanation of symbols and information shown on the boiler's display during operation.
Instructions for adjusting settings like heating mode and water temperatures.
Details on selecting between Heating, SUMMER, and VACATION modes.
Instructions for adjusting the desired hot water temperature via the control panel.
Procedure for setting the central heating water temperature range.
Methods for controlling the boiler's heating output based on various inputs.
How to set and operate the boiler using only the control panel for CH temperature.
Guidance on using a room regulator for central heating temperature control.
Explanation of how an ON/OFF room regulator controls boiler operation.
How a modulating room regulator adjusts boiler output based on room temperature.
Using an isothermal regulator and external sensor for temperature-dependent control.
Technical diagrams showing dimensions and connection points for different Panther models.
Diagram showing dimensions and connection points for the Panther 30 KTV.
Diagram showing dimensions and connection points for Panther 25 KOO/KOV.
Diagram showing dimensions and connection points for Panther 25 KTV/KTO.
Diagram illustrating dimensions and connection points for the Panther 12 KTO model.
Guidelines for connecting the boiler to central heating, hot water, and gas supply pipes.
Specifies the required and recommended operating pressure for the heating system.
Procedure and conditions for filling the heating circuit with water.
Instructions for draining water from the boiler and heating system.
Information on checking and filling the expansion vessel for pressure regulation.
Location and function of the safety valve; precautions for its use and maintenance.
Requirements for connecting the boiler to the natural gas supply.
Diagram showing the internal components and flow paths of the Panther 25 KOV boiler.
Diagram showing internal components and flow paths for Panther 30 KTV and 25 KTV models.
Diagram showing internal components and flow paths for the Panther 25 (12) KOO boiler.
Diagram showing internal components and flow paths for the Panther 25 (12) KTO boiler.
Details on ventilation methods, piping requirements, and condensate management for exhaust systems.
Information on ducting methods and maximum allowed lengths for exhaust systems.
Description of the C12 method for air intake and exhaust venting.
Description of the C32 method for vertical air intake and exhaust venting.
Description of the C42 method for connecting to a double shared chimney.
Description of the C52 method for separate piping into different areas.
Description of the C82 method for air intake from open area and exhaust to shared chimney.
Description of the B22 method for exhaust to open area and air intake from internal space.
Description of the B22D method specific to the 30KTV model.
Requirements for the down-gradient of the exhaust piping and condensate drainage.
Table detailing permitted fume duct lengths for various boiler models and methods.
Illustrations and rules for placing flue ducts, considering safety zones around apertures.
Safety precautions regarding distances from flammable materials and prohibited venting areas.
Instructions for safely connecting the boiler to the mains electrical supply.
Connecting room regulators and external sensors for optimal boiler performance.
Schematic illustrating the electrical connections and components of the boiler's control board.
List of error codes, their descriptions, and user-resolvable solutions.
General safety advice for operation and maintenance, emphasizing qualified personnel.
Guidelines for maintaining the boiler's performance and longevity.
Instructions for cleaning the boiler's exterior safely and effectively.
Importance of annual servicing by a qualified technician for optimal performance and lifespan.
Recommendation to use only original manufacturer parts for safe operation and longevity.
Measures to take in specific situations like accidental boiler start-up or presence of flammable vapors.
Information on converting the boiler from natural gas to propane using a conversion kit.
Action to take in case of gas leaks or suspected supply failures.
Graph showing available system pressure related to heating system flow.
Detailed technical specifications for various Panther boiler models.
Detailed technical specifications for the PANTHER 30 KTV model.
Detailed technical specifications for the PANTHER 25 KOV model.
Detailed technical specifications for the PANTHER 25 KOO model.
Detailed technical specifications for the PANTHER 25 KTV model.
Detailed technical specifications for the PANTHER 25 KTO model.
Detailed technical specifications for the PANTHER 12 KOO model.
Detailed technical specifications for the PANTHER 12 KTO model.
To Next Page
General