What to do if Protherm Boiler CH pressure sensor fails and pressure doesn't rise after pump starts?
If your Protherm Boiler displays error codes due to a permanent failure of the CH pressure sensor and no pressure increase is detected after starting the pump, first press the RESET key. If the issue persists, it is recommended to contact a qualified technician.
What to do if thermal fuse fails in Protherm Boiler primary exchanger?
If your Protherm Boiler indicates a thermal fuse failure in the primary exchanger, begin by pressing the RESET key. If the problem continues after this step, it is necessary to contact a qualified technician.
How to fix an error in the SHE entry sensor of a Protherm Boiler?
If your Protherm Boiler shows an error in the SHE entry sensor, try pressing the RESET key. If the error persists after resetting, contact a qualified technician for assistance.
What to do if Protherm Boiler charger pump has an error?
If your Protherm Boiler displays an error related to the charger pump, your first step should be to press the RESET key. If the error continues to appear after doing this, contact a qualified technician.
What to do if Protherm Boiler anode tester has an error?
If your Protherm Boiler shows an error with the anode tester, press the RESET key. If the error remains after resetting, it's best to contact a qualified technician.
How to fix an error in the APC module sensor of a Protherm Boiler?
If your Protherm Boiler indicates an error in the APC module sensor, start by pressing the RESET key. If the error persists after the reset, contact a qualified technician for further assistance.
Procedure for initial installation and start-up by authorized personnel.
Emergency procedure to follow in case of a gas leak detection.
General safety rules and precautions for operating the boiler.
How to adjust heating modes and temperatures for user comfort.
Methods for controlling the boiler's heating output and temperature.
Guidance on connecting the boiler to central heating, hot water, and gas lines.
Recommended pressure range for the heating system and filling procedures.
Location and function of the safety valve and precautions for its use.
Details on connecting the boiler to the natural gas supply.
To Next Page
General