PROTMEX PT3378-WWVB - DST on; off; Daily Alarm Setting

PT3378-WWVB Manual
 DST On / OFF : After time zone is settled, the DST icon will satrts flashing, now use “▲” and “▼” buttons to
set the DST On / Off, press ” ” button to confirm your setting.
 Hour / Minute: After DST on / off is settled, the Hour display will starts flashing, use “▲” and “▼” buttons to
set the correct hour and press ” ” button to confirm your setting; then the minute display starts flashing, use
“▲” and “▼” buttons to set the correct minute, then again press ” ” button to confirm your setting.
 Date / Month Different Display Mode: After hour /minute are settled, the Month and Date icons starts flashing. Now
use “▲” and “▼” buttons to set the date display on Month/Date or Date/Month, and press ” ” button to confirm
your setting.
 Year Setting: After date and month displayed mode is settled, the Year display 2015 starts flashing. Now use “▲”
and “▼” buttons to set the correct year and press ” ” button to confirm your setting.
 Month Setting: After correct year is settled, the Month display starts flashing. Now use “▲” and “▼” buttons to set
the correct month.
 Date Setting: After correct month is settled, the Date display starts flashing. Now use “▲” and “▼” buttons to set
the correct date and press ” ” button to confirm your setting.
 The end of all settings.
F.Y.I.:
 Under the system setting mode, if no operation is performed within 10 seconds, the system will exit the setting
mode and revert to normal time display.
 4 Different Time Zones:
EST: Eastern Standard Time (E)
-5
CST: Central Standard Time (C)
-6
MST: Mountain Standard Time (M)
-7
PST: Pacific Standard Time (P)
-8
 Please correctly set the time zone according to your location, otherwise the clock will not display the right time.
 When the Daylight Saving Time System is not implemented in this area, please turn OFF the DST.
Daily Alarm Setting:
Short press ” button once to check the ALARM TIME on display.
How to set the alarm:
 Press and hold ” button for 2 seconds until the Alarm Time hour starts flashing on the screen, use the “▲” and “▼”
buttons to set the required hour; short press ” button again and use the “▲” and “▼” buttons to set the required
minute.Finally confirm your alarm settings by pressing ” button.
F.Y.I.:
if no operation is performed within 10 seconds, the system will exit the setting mode and revert to normal time display.
Turn On / Off the Alarm Function:
 Turn On: Push the switch to the ” position and there is a ” icon displayed on the LCD screen.
 Turn Off: Push the switch to the ” position and the ” icon disappeared from the LCD screen.
F.Y.I.:
The alarm will go on for 2 minutes if you do not turn it off (you can press any button except the ” button to stop
the alarm).