W W W . P R O T O P A I N T B A L L . C O M
16
RAIL
™
BOLT
ASSEMBLY AND MAINTENANCE
MAINTENANCE
The basic maintenance for the RAIL™ BOLT is to clean all surfaces of
dirt, broken paint or other debris, check for any wear and tear on
the O-rings and changing them if needed, and finally applying
a thin coat of DYE Slick Lube on all surfaces. Before installing
the RAIL™ BOLT back to the RAIL™ marker check that the
bolt moves freely without a lot of friction and
make sure all pieces are threaded
together snugly!.
If the RAIL™ BOLT is not kept clean
and well lubed, you will either start
seeing erratic velocity, leaks or over
long period of time, physical
damage to the RAIL™ BOLT
components.
For troubleshooting leaks and other bolt problems, consult the
troubleshooting section at the end of this manual.
To Next Page
Loading...
