LOADERS AND FEED NECK
LOADERS AND FEED NECK
To achieve the maximum
performance of the RAIL™ you will
need to use a motorized loader that
force feeds paintballs into the
RAIL™ marker, preferably the
Rotor™ Loader. Using a slower
motorized loader or a non-
motorized loader will work, but the
rate of fire and performance will be
reduced.
TO FIT A LOADER ONTO THE
RAIL™:
1. To fit a loader onto the RAIL™,
tighten your loader into the
adjustable feedneck using a 5/32”
Allen key.
2. Loader should now be held in with a snug fit.
3. There is no maintenance needed for the feed neck
besides keeping it clean of broken paint, dirt and
debris.
W W W . P R O T O P A I N T B A L L . C O M
18
To Next Page
Loading...
