Precautions
Please read all the contents of the manual carefully before using the products
described in this manual. Please read the following precautions carefully toensure
that the barcode scanner is safe to use according to the design specifications,and
please carefully keep the manual for future reference.
1.
All software (including firmware) provided to the user with the barcode
scanner is protected by copyright.
2.
The manufacturer reserves the right to make changes to the software
(including firmware) to improve the stability or other performance ofthe
barcode scanner.
3.
The contents of this manual are subject to change without notice.
4.
The manufacturer is not responsible for any loss or claim arising from the use
of this manual by a third party.
5.
Do not throw or drop the barcode scanner or subject it to strong impact.
Doing so can damage the part, abort the execution of the program, cause the
memory contents to be lost, or interfere with the normal use of the barcode
scanner.
6.
Use only your fingertips or blunt instruments to operate the switch button.
Using a pointed object can damage the buttons and cause a short circuit in
the internal circuitry.
7.
When the temperature suddenly changes, condensation may form on the
outer casing of the barcode scanner. If you run a barcode scanner at this
time, it may affect normal work. Therefore, care should be taken to avoid
environments that may cause condensation. If condensation forms frost, wait
until it is completely dry before using the barcode scanner.
To Next Page
Loading...
